September, 2020 | EwinRaicng Blog

E-WIN 2.0 Edition RGB Gaming Desk Review

September 3, 2020 No Comments

E-WIN 2.0 Edition RGB Gaming Desk: Introduction

What goes well with a nice gaming chair? A gaming desk of course! And not just any gaming desk – E-WIN now has the 2.0 Edition RGB Gaming Desk that we will look at today! Long before there were any gaming chairs or gaming desks, you just used an old creaky office chair and whatever put-together computer desk that was on sale 12 years ago at the local Office Max or box store. You know, the chair with splits in the seat. The one that would go down but not come back up without bouncing like a pogo stick. Yeah, that one. While not very flashy or exciting, that office chair and desk pretty much got the job done. Barely. Well, all that has changed with a variety of excitingly purpose-built gaming furniture that is pouring into the market today. This RGB gaming desk allows for comfort and functionality so you can focus on one thing – GAMING!

E-WIN 2.0 Edition RGB Gaming Desk: Assembly

As with all of the gaming chairs and desks I have seen so far, there is some degree of assembly involved. And I can add that with the units I have reviewed, they have all come with the basic tools necessary for the assembly. This saves you the time to go find all the right tools. Of course, one person can do the assembly, but a little help from a second person certainly makes the job easier. The components for this desk are precisely.

packed with styrofoam blocks and soft foam padding to minimize any damage in shipping. The instructions are not bad, especially if you actually follow them so make sure you are familiar with all of the pieces and assembly steps first. It might be tempting to tear into it, but really – go over the instructions before you begin.

The frame starts with the side legs and goes together with two welded cross bars which then connect the side legs. I always try to keep the fasteners a little loose until everything is roughly in position, and then I will snug them up. When the fasteners are all tightened, the frame becomes rigid and very sturdy. After the frame is assembled, it is time to install the desktop. Be careful not to scratch the surface of your new top! Again – it is a good idea to have a helper for the top installation. Connect the RGB cables for the lighting in the legs. Set the top on the frame and get the fasteners started. Get everything lined up and then tighten the fasteners. Connect the RGB cables for the desktop to the cables from the frame.

The front banner looks nice with the fully embroidered logo and text although if your desk goes up against a wall, you won’t be able to see it. Next, it is time to figure out which side to mount the included cup holder on (there are mounting provisions for both left and right under the top), and then it is time to power up the RGB lighting! The lighting uses a standard USB plug to connect to a power source which can be an external 5-volt adapter or you can plug right into a USB port on your computer. You will want to power it up for a test before you lock everything down since you will ultimately be tucking much of the wiring away. If you wait to test the

lighting, it can be a pain to have to pull stuff back apart for access to the wiring connections. The wiring is covered in the instructions. Pay attention to the RGB connections for the desktop. They are located in two pockets under the top that is taped over. Easy to miss, but necessary to connect for the lighting along the sides of the top.

The entire desktop surface is laminated with a cool faux carbon fiber texture. I was impressed with the flawless consistency of the way the laminate was applied. No bubbles or waves. This surface is designed to work well with the optics of your gaming mouse so you can run sans mouse pad if you like. Spill your drink? No problem – just wipe it up and keep on gaming!

And now it is time to fire up the RGB lighting. Some might argue that lighting on a desk is just too over the top. There is RGB lighting on practically every computer component you can buy. I am not sure – I mean I do actually like it. And as with any new gadget, after the novelty wears off – yeah, I guess I don’t turn it on as much. But I still like it. The controls are built into the right side of the desktop for easy access. There are many color effect modes and you can also control the speed – or turn the lighting completely off if you like. The lighting is confined to the sides of the desktop and down the side of each leg. Take some time to cycle through all the lighting modes to find the ones you like best. Also, there are leveling feet at each corner to help with uneven floors.

For my use, I had to remove the lower bar for the front banner to get my computer case to fit under the desk. Not a huge deal, but if you want to put your case on the floor and want to keep it under the gaming desk, then there are some case dimension limits and I go over this in the video review.

This is a great gaming desk! Check out the video review to see the desk assembly and then the real treat is the RGB effects in action! Plus, if you use code OCC on the E-Win site, you’ll save 20% off your order!

Check this video for more info https://www.youtube.com/watch?v=FPf3xBtDCsc&feature=emb_logo

Note: This is a review post from https://www.overclockersclub.com

Review

E-Win Champion Series Gaming Chair – Reasonable Pricing for Gaming Comfort [Review]

September 3, 2020 No Comments

As a PC gamer, there are a few essentials that you should have aside from the PC itself to really consider yourself equipped for hours and hours of gaming.

One of the main things and oddly overlooked things when it comes to gaming accessories is a good gaming chair. Why is a gaming chair overlooked? In my personal experience and what I hear from my friends is, It’s mostly in the expense. Gaming chairs are expensive and I pride myself on not reviewing things where the cost outweighs the benefit. E-Win has a gaming chair that we felt gives you really good benefit for the money.

E-Win and the GSG gang got together and we asked if we could review one of the more affordable yet solid gaming chairs. E-win graciously accepted sending us one of their Champion Series Ergonomic gaming chairs.

After awhile we got a huge box and in it was everything we were excited about and for me my first real gaming chair.

SETUP, FIT & FEEL

When I opened the box, I was a little overwhelmed, mostly because I had not put together a gaming chair before but fortunately for me, in this business of tech you kinda have to be handy by default. First thing I noticed right away is how big the chair was going to be. I also noticed that it was going to be comfortable upon first glance.

The setup overall was very easy once I figured out the weird layout of the instruction sheet. Not too many parts to deal with. There are 3 leading components which are the main chair with armrests and lumbar support, the hydraulic base and the wheels.

Since I had never built a gaming chair before this took me longer than normal at about 40-45 minutes, but had this been something I was accustomed to doing I would have surely cut that time in half. Setup of this chair was quite easy. I even put a little video together detailing the ease at which I was able to put together this chair. It’s timelapsed so you won’t have to go thru 30 minutes of chair building boredom but nonetheless everything was smooth and I was gaming in this chair right away. Just click the link below if you wanna check it out on the GSG YouTube channel https://www.youtube.com/watch?v=XP6p_pR0xLs&feature=emb_logo

E-Win Champion Series Gaming Chair Unboxing

The E-Win Champion Series chair as I said prior is huge. You have a great deal of real estate to play with. The Champion Series chairs come with a nice soft leather with diamond stitching in the back and seat portion of the chair and just by looking at it you can see just how premium it is. Once you sit in it, you’ll experience the premium comfort as well. With the Champion Series chairs you also get two pillows, one for your head and neck support and the other for your middle or lower back depending on where it suits you best. The chair pillows are easily adjustable and offer really nice comfort especially for those long hours of hardcore gaming. I myself struggle with lower back pain so having these pillows most important the lower pillow is a godsend.

The seat portion of the chair does a good job of holding you in without being constrictive. The armrests are somewhat comfortable considering that they have no cushioning but I won’t kill E-Win for this. My comfy desk chair at my job doesn’t have any armrest cushioning either and I sit there for 8 hours a day and most times I don’t really notice. It’s much of the same here.

The wheels and base on the chair are really well made while offering smooth maneuverability and good height adjustment for the tall people of the world. So if you’re tall, this chair drops really low and softly so you aren’t left with a chair that’s nice only if you’re under 6 ft.

If you really want to relax, this chair has really good adjustment points. If you want you can sit straight up at an 85 degree angle or go as far back as 155 degrees if relaxation while gaming is more your style. It all speaks to the level of comfort that this chair provides when you own one.

SPECS

The E-Win Champion Series Gaming chair exudes quality and you can take a look at the specifications of the chair itself just to see how much went into the construction of this gaming chair.

FINAL THOUGHTS

The E-Win Champion Series gaming chair is a great addition to not only your office setup but for the gaming setup you may have. It offers so much. You get good design, comfort, great build, and a chair that you play games in for hours and never get tired. Bet yet maybe you might like this chair because it is so relaxing. At just $300 it’s affordable comparable to other gaming chairs out there that can easily exceed $500 or more so you also get a great deal with this chair. If you’re looking to get one of these badass chairs you can grab one on their website HERE and pick a color and game in style. They are also available on Amazon as well.

Note: This is a review post from https://gstylemag.com

New Arrival, Review

Ewinracing Champion Series [Review]

September 3, 2020 No Comments

By: Mithrandiel

Note: I was provided a Champion Series chair from Ewinracing in exchange for my fair and honest review.

I, like so many others, find myself working from home now on a somewhat regular basis. My wife has now completely moved to a work from home situation as well. As more and more folks find themselves working from home, there has been a dramatic increase in the need for a proper workspace: a good desk, a nice webcam, a great headset…and of course, a comfortable chair.

Office chairs have largely been seen in a league of their own outside of gaming chairs, as if they serve different purposes – but in reality, many professionals are flocking to companies like Ewinracing for a sturdy, comfortable office chair at affordable prices.

We knew it was time for a new chair when our old chair quietly whispered “Kill me…” as I plopped down into it for the 10,000th time. (Don’t worry, I’ve called in an old priest and a young priest.) It was a simple, black office chair with cheap plastic covering that was an upgrade from the stiff desk chair I had before, but it was time for yet another upgrade. A serious one.

Having reviewed Ewinracing’s products before, I decided to browse the catalog and see if there was anything new that could fit in well with our more neutral office setup. Neon green and red chairs didn’t exactly work well with the overall aesthetic.

Thankfully, I found a nice neutral gray ewin gaming chair:

Once the chair arrived, which took about a week, it was time to dive in and put the thing together!

As I began to navigate the directions, it was a bit odd that it didn’t seem specific to the model I purchased. There were some instructions that seemed more generalized, or for other series like their Hero and Knight lines.

The base is very sturdy, as is the hydraulic component. Always good to have a strong foundation – pretty sure I’ve heard words of wisdom along those lines many times in my life.

The weighty pieces did make the solo job a bit challenging at times – would definitely go a bit more swimmingly with two people. Took me just about 90 minutes to make sure I had it put together the right way. Those who are more skilled in the art of putting together furniture could likely get it done in an hour.

The Champion series chair is complemented by two pillows – one that rests at the base of the chair, and the other to support your head. Now, I’m just under 6 feet tall, and the pillow hits right where it should. My wife, who’s about 5’6″, says that it doesn’t work as comfortably for her. It’s still fine, but not ideal. Ewinracing does offer different sizes in some of their other lines, but this championship series is a one-size fits all deal…so it won’t fit your size if you’re a bit shorter – especially if you raise the chair to max height.

That being said, the material is extremely comfortable. While most of the other ewin gaming chairs have a sort of leather-like material, the fabric in this model is much more breathable and firm – offering great comfort, breathability (crucial in these summer months!) and of course, reminding you to sit up straight!

While the quality of the materials is solid at the base and through the seat, the armrests, while offering good adjustability, feel a bit cheap comparatively. It’s not a deal-breaker by any means, but just a bit surprising considering the quality of the rest of the chair.

Overall, I’m very happy with my new ewin gaming chair – It’s got a professional look to it, and is very comfortable.

The chair usually retails for $299, but if you use our code, “thegeeklygrind”, you can save an additional 30% off! Head over to the ewinracing site to check out your options, and add a great new chair to your home office setup! RATE1

Note: This is a review post from http://www.thegeeklygrind.com

Review

E-WIN 2.0 RGB Gaming Desk Review: Gaming in Style!

September 3, 2020 No Comments

E-WIN 2.0 RGB Gaming Desk Review: Gaming in Style!

E-WIN 2.0 RGB Gaming Desk

We are excited to announce a new partnership with EwinRacing who produces famous gaming chairs, office chairs, and home computer chairs. Another line of products they offer is their gaming desks, including this E-Win 2.0 RGB Gaming Desk.

With all the time spent at home these days, why not spend it gaming in style?

EwinRacing is all about gaming with their really cool chairs, which we will be reviewing very soon, and these gaming desks. This particular model brings everything you could think of into an amazing, sleek-looking product.

The box this product came in is pretty impressive in size and brings excitement about what is inside. This is what you see when you open it up.

It might be a little intimidating when you first open the box but once you unload it, you realize there are not a lot of parts which is encouraging to anyone who knows about assembling office products. It can be a tedious process!

Specifications:

The desk itself is not a huge desk but it has sufficient space for anything you would need for gaming. The gaming surface is up to 48in.

Assembly/Setup:

Speaking of assembly, the directions are just a few pages long and the small hardware required for assembly has tools included. Technically, you could assemble this without ever opening your toolbox!

One of the challenges we had with assembling the desk was the clarity of the instructions. There were no words, only pictures. This caused us to put the logo banner on the incorrect way the first time.

There is a specific direction the bars that connect the two legs together should be to make sure the wires line up. And, speaking of wires, the instructions on wiring could have been a little clearer. It was somewhat of a guessing game but we managed to figure it out pretty quickly.

We eventually searched and found an assembly video for the desk on YouTube and referenced it when needed.

Finished Product:

After assembling the desk, we were excited with the finished product!

The quality and sturdiness of this desk are amazing! The gaming surface has a carbon fiber texture. It has the feel of a quality product that will last for a while!

Features:

The desk has some really cool features! First, let’s talk about lighting. There is multi-color and single color lighting that goes up the side of both legs and on the side of the table.

E-WIN 2.0 RGB Gaming Desk

You can have moving lights or solid lights. The light settings are controlled by the buttons on the front right corner of the desktop.

Another great feature is the cupholder. You can install it on either side of the desk to fit your needs.

You can manage the cables using the two different cut-out ports on each side of the back of the desk.

When it comes to a need for storage, this desk does not offer much. If you keep files or need extra space to spread your paperwork out, this is not really going to be the best option for you.

The desk comes with a 3-year limited warranty.

Pricing:

You can purchase the E-WIN 2.0 RGB Gaming Desk on their website for $399.00. If you use our discount code, TNS you will receive a 20% discount! You should also check out their newest model that includes a smart wireless charger and USB port.

Verdict:

We are excited about this gaming desk! Between the really cool lighting, cupholder, and cable management ability as well as the overall quality of the desk, you really can’t go wrong. If gaming is your priority and you do not need it for storage this is a great choice.

Grab your own gaming desk today using our code TNS to save 20% off your order!

Websites: https://www.ewinracing.com/home/47-e-win-20-edition-rgb-gaming-desk.html

Facebook: https://www.facebook.com/EwinRacing/

Twitter: @EwinRacing

Source: Some of the images are from EwinRacing’s website.

Note: This is a review post from https://thenerdstash.com

Review

E-WIN Champion Gaming Chair: Ergonomic Comfort Wins

September 1, 2020 No Comments

BY RENEE JOHNSON

As more of us work from home, we are spending more time in our office chairs. Whether it is work or play, our backs are most likely feeling the number of hours we are hunched over our screens.

Enter ergonomic chairs many of which provide comfort for long hours of sitting. However, some of these can be a major investment. That’s when I discovered that I could get a gaming chair that could double as an office chair and for those gaming breaks that are essential to greater productivity throughout the day.

The first PC gaming chair I tried was the E-WIN champion gaming chair. Priced at just under $300, it offered an appealing price compared to those fancy ergonomic chairs plus it looked cool from the pictures. Here’s my review.

About E-WIN Champion Gaming Chairs

The E-WIN Champing Gaming Chairs are ergonomic gaming chairs that come with a lumbar pillow. You can choose from color combinations that include black and white, black and red, black and day-glow green, black and turquoise, and black and pink.

Features include stain-resistant 2.0 PU leather, which you can clean with a cloth yet looks and feels like real leather. The chairs also contain cold-cure foam, which is the company’s proprietary high-density foam, which feels very similar to memory foam that you might find on a mattress. The elasticity of the foam is designed to prolong the chair’s life and comfort level.

Pros and Cons

If you have read any of my product reviews then you know that, while I love gadgets, I don’t love assembling things. Some of the other ergonomic chairs I had considered looked like you needed an engineering degree to put them together. Not this one.

All I needed was an Allen key and about 15 minutes. The pieces were organized well in the box and mostly pre-assembled. Everything was labeled so I felt confident about what I was doing.

Once assembled, I found many other things to like about the gaming chair. It is designed and made with quality materials that don’t feel in the least bit cheap. The stitching and leather-like finish shows that the gaming chair is made to last. It feels like a much more expensive ergonomic chair.

The comfort level can be adjusted to fit the person sitting in the chair. It has a hydraulic height-adjustment lever like most chairs. But, it also has a reclining lever, which lets you put the chair almost to a horizontal position.

I love the armrest that adjust as well, including rotating, sliding to the left or the right, raising up and down, and pushing them forward or backward. You can even take the armrests off the chair.

In terms of cons, there is only one minor point. The lumbar and neck pillows are a bit awkward in terms of placement and feel. However, it’s not enough to make the whole chair uncomfortable.

In the Box

The box contains the chair components, including pillows. It also has a pair of gloves and instruction manual. The chair comes with a 10-year limited warranty.

Where to Buy

The E-WIN gaming chairs are available on the E-Win website as well as through Amazon. E-Win offers free shipping and returns. Use code TECHREPORT for 20% off.

Final Thoughts

Overall, this ergonomic gaming chair is a great buy. It’s comfortable, sturdy, and easy to assemble. Everything is adjustable for even greater comfort. The quality of the materials also makes the price an even better value.

« Previous 1 2